Confirmation Of Currently Installed Firmware Version - Hitachi EM-G21 User Manual

Hide thumbs

Advertisement

Table of Contents

6.2 Confirmation of Currently Installed Firmware Version

To confirm the firmware version currently installed in the Gateway, follow the procedure
below.
1.
Connect the user PC to the Gateway.
2.
Temporarily terminate firewall and/or antivirus software if running on the user PC.
3.
Type the URL of the "EMS Gateway" setup page ("https://192.168.24.1/" by default)
in the address bar of your browser and hit the Enter key. A log-in dialog opens.
4.
Type your user ID ("user" by default) and password ("user" by default) in applicable
fields, and click OK button.
5.
The top page of the setup page opens. The firmware version currently installed in
the Gateway appears in "Firmware Version" section.
6.
Close the browser to log out from the "EMS Gateway" setup page. Resume firewall
and/or antivirus software if terminated in Step 2.
- 26 -

Advertisement

Table of Contents
loading

  Related Manuals for Hitachi EM-G21