Copying Of Default Wireless Lan Settings - Hitachi EM-G21 User Manual

When the user prepares a LAN cable, procure a LAN cable of category 5e or higher if
1 Gbps (1000 Mbps) link speed for 1000BASE-T is desired. Otherwise, slowdown of
link speed or communication failure may result.

1.3.4 Copying of Default Wireless LAN Settings

Copy default wireless LAN settings mentioned in Subsection 1.3.1 above by taking note
thereof onto paper, by taking a picture thereof, or by using a similar method. These
default wireless LAN settings, i.e., Service Set IDs (SSIDs) and relevant Security
Encryption Keys comprising Pre-Shared Key (PSK) and Wired Equivalent Privacy (WEP)
key, are shown on the equipment label as illustrated below.
Note: The illustrated label is for reference only and may differ on actual units.
Take utmost care in managing the medium that contains a copy of default wireless
LAN settings, i.e., SSIDs and Security Encryption Keys shown on the equipment label.
NOTICE
INFORMATION
The Service Set IDs (SSID) are displayed on
the side of the The Gateway.
Hitachi recommends that you choose SSID-1
for your network for increased security.
- 5 -