Table of Contents
Advertisement
2.5
Safety instructions regarding operation
Standard operation
X56b210.fm
Danger!
In some rare cases of internal soiling such as e.g. due to soiled
hydraulic fluid, wear debris or residual dirt particles from system
components, the controller valve of the travel drive axial plunger
pump may block. The volume flow of the variable-displacement
pump then cannot be controlled by the user any longer. In such
cases, the vehicle may start moving slowly upon starting even in
neutral lever position or the expected slowing down is not
initiated when backing off the throttle during ride.
Provide for safe condition of the machine then by braking with
service or parking brake and immediate stop of the combu-
stion engine by pulling ignition key
Have the machine inspected or towed by qualified personal
only
•
Before beginning work, familiarise yourself with the surroundings and
circumstances of the work site. These are for example obstacles in the
working and travelling area, the soil bearing capacity and any
necessary barriers separating the work site from public roads
•
Take the necessary precautions to ensure that the vehicle is used only
when in a safe and reliable state!
Operate the vehicle only if all protective and safety-oriented devices,
such as removable safety devices, sound proofing elements and
exhausters etc. are in place and fully functional!
•
Check the vehicle at least once a day/per working shift for visible
damage and defects. Report any changes (incl. changes in the
vehicle's working behaviour) to the competent organisation/person
immediately! If necessary, stop the vehicle immediately and lock it!
•
In the event of malfunctions, stop the vehicle immediately and lock it!
Have any defects rectified immediately!
•
Start and operate the vehicle from the operator seat only unless special
controls intended for this purpose are available!
•
Carry out start-up and shut-down procedures in accordance with the
operation manual, and observe the telltales!
•
Before putting the vehicle/implement into operation (start-up/moving),
make sure nobody is at risk by putting the vehicle/implement into
operation!
•
Before driving with the vehicle, and also after interrupting work, check
whether the brakes, the steering, signalling and light systems are
functional!
Safety instructions
2-5
Advertisement
Table of Contents
