Part Identification Chart - ICON Health & Fitness Weider 9000 User Manual

51mm x 76mm Outer Cap (79)
50mm Square Inner Cap (43)
15mm x 8mm Spacer (55)
15mm x 13mm Spacer (39)
15mm x 10mm Spacer (40)
45mm Square Inner Cap (42)
M10 x 180mm Bolt (78)
19mm Round Inner Cap (81)
25mm Round Inner Cap (45)
25mm x 50mm Inner Cap (82)
13mm x 12mm Spacer (38)
13mm x 10mm Spacer (75)
1" Retainer (35)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the centre of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M8 Nylon Locknut (48)
M10 Nylon Locknut (49)
M6 Washer (59)
M8 Washer (53)
M10 Washer (52)
M6 x 16mm Bolt (80)
M10 x 19mm Bolt (61)
M8 x 22mm Shoulder Bolt (60)
M6 x 63mm Bolt (56)
M8 x 58mm Bolt (41)
M8 x 70mm Bolt (58)
M10 x 68mm Bolt (46)
M10 x 65mm Bolt (54)
M10 x 60mm Carriage Bolt (50)
M8 x 65mm Bolt (51)
M10 x 60mm Bolt (47)
M10 x 45mm Bolt (57)