Table of Contents
Advertisement
Quick Links
ORDERING REPLACEMENT PARTS
If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
• the MODEL NUMBER of the product (WEEVBE13340)
• the NAME of the product (WEIDER
®
INVERSION SYSTEM inversion table)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on
pages 14 and 15)
Part No. 217352 R0505A
Printed in China © 2005 ICON IP, Inc.
Model No. WEEVBE13340
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK
csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness Weider WEEVBE13340
Summary of Contents for ICON Health & Fitness Weider WEEVBE13340
-
Page 1: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4 Revie Road Industrial Estate Model No. -
Page 2: Warning Decal Placement
EXPLODED DRAWING—Model No. WEEVBE13340 TABLE OF CONTENTS R0505A WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
PART LIST—Model No. WEEVBE13340 IMPORTANT PRECAUTIONS R0505A Key No. Qty. Description Key No. Qty. Description WARNING: To reduce the risk of serious injury, read the following important precautions Backrest Frame Clip before using the inversion table. Backrest M6 Washer 1. Read all instructions in this manual before 10. -
Page 4: Developing A Program
DEVELOPING A PROGRAM WARNING: Following is a list of factors and conditions that may make inverting inadvis- able (this list is not exhaustive; it is intended only for reference). If one or more factors or conditions apply to you, consult your physician before using the inversion table. This section contains information and suggestions about using the inversion table. -
Page 5: Before You Begin
STORING THE INVERSION TABLE BEFORE YOU BEGIN To store the inversion table, adjust the Adjustment Leg (3) to the shortest length (see ADJUSTING THE Thank you for selecting the WEIDER ® INVERSION Department at 08457 089 009. To help us assist you, ADJUSTMENT LEG on page 11). - Page 6 ADJUSTING THE ADJUSTMENT LEG ASSEMBLY The length of the Adjustment Leg (3) can be adjusted to correspond to the height of the user. Remove the Pin (30) from the Backrest Frame (1). Pull the Large • Place all parts in a cleared area and remove the Knob (27) out as far as it will go.
- Page 7 3. Rest the two Pulleys (29) inside of the slots in the ADJUSTMENTS Saddle Plates (20). This section explains how to adjust the inversion table. See DEVELOPING A PROGRAM on page 13 for impor- tant information about how to get the most benefit from your exercise program. Make sure all parts are properly tightened each time the inversion table is used.
- Page 8 6. Remove the Pin (30) from the Backrest Frame (1). 8. Attach the Right Handlebar (21) to the M8 x 30mm Bolts (45) on the Front and Rear Frames Pull the Large Knob (27) out as far as it will go. (5, 6) with two M8 Nylon Nuts (40).