Table of Contents
Advertisement
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
3/8" x 3" Screw (158)–8
M10 x 20mm
M10 x 25mm Hex
Patch Screw
(156)–4
M10 x 100mm
Toggle Bolt (160)–8
M10 x 90mm Screw (140)–8
M10 x 93mm Screw (102)–4
Screw (101)–8
M10 Star
Washer (161)–4
7
M10 x 30mm
Screw (100)–2
M10 x 35mm
Screw (95)–4
3/8" x 1 1/4"
Washer (159)–8
Advertisement
Table of Contents
