Advertisement

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
Please provide the following information when ordering replacement parts:
• The MODEL NUMBER of the product (WEEMSY18220)
• The NAME of the product (WEIDER
®
8950 weight system)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING
attached at the centre of this manual)
Part No. 193960 R0203A
Printed in China © 2003 ICON Health & Fitness, Inc.
Model No. WEEMSY18220
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or if there are missing
parts, please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.iconeurope.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the weider 8950 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ICON Health & Fitness weider 8950

  • Page 1: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Model No. WEEMSY18220 USER'S MANUAL Leeds, LS118JG Serial No. Write the serial number in the space above for future reference.
  • Page 2 NOTES TABLE OF CONTENTS IMPORTANT PRECAUTIONS ............. 3 BEFORE YOU BEGIN .
  • Page 3: Troubleshooting And Maintenance

    TROUBLESHOOTING AND MAINTENANCE IMPORTANT PRECAUTIONS TIGHTENING THE CABLES WARNING: To reduce the risk of serious injury, read the following important precau- Woven cable, the type of cable used on the weight tions before using the weight system. system, can stretch slightly when it is first used. If there is slack in the cables before resistance is felt, 1.
  • Page 4: Before You Begin

    BEFORE YOU BEGIN CABLE DIAGRAMS Thank you for selecting the versatile WEIDER ® 8950 questions, please call our Customer Service The cable diagrams below show the proper routing of the Short Cable (47), the Low Cable (48), the Press Cable weight system.
  • Page 5: Weight Resistance Chart

    WEIGHT RESISTANCE CHART ASSEMBLY The chart below shows the approximate weight resistance at each exercise station. “Top” refers to the 6-lb. top • As you assemble the weight system, make sure weight. The other numbers refer to the 12.5-lb. weight plates. Weight resistance shown for the butterfly arm sta- Make Things Easier for Yourself all parts are oriented as shown in the drawings.
  • Page 6 2. Attach the Upright (3) to the Base (1) with the two ADJUSTMENTS M8 x 63mm Carriage Bolts (58) and two M8 Nylon Locknuts (69). Do not tighten the Locknuts yet. This section explains how to adjust the weight system. Refer to the accompanying exercise guide to see the cor- rect form for each exercise.
  • Page 7 4. Slide the eight Weights (15) onto the Weight SEAT ASSEMBLY Guides (10), with the slot for the Weight Pin (not shown) on the bottom and on the side away from the Upright (3). 30. Attach the Backrest (18) to the Upright (3) with two M6 x 63mm Screws (67) and two M6 Insert the Weight Tube Bumper (13) into the bot- Washers (73).
  • Page 8 26. Wrap the Low Cable (48) under a 90mm Pulley ARM ASSEMBLY (34). Attach the Pulley and a pair of Pulley Covers Lubricate (35) to the bracket on the Base (1) with an M10 x 52mm Bolt (52) and an M10 Nylon Locknut (68). 7.
  • Page 9 22. Wrap the Short Cable (47) over a 90mm Pulley 10. Insert the post on the Left Arm (7) through the (34). Attach the Pulley and a pair of Pulley hole in the Press Frame (5). Be sure the Arm is Covers (35) to the Offset Double “U”-bracket (42) behind the indicated bracket on the Press with an M10 x 52mm Bolt (52) and an M10 Nylon...
  • Page 10 14. Wrap the High Cable (50) over a 90mm Pulley 18. Wrap the Press Cable (49) under a 90mm Pulley (34). Attach the Pulley and a pair of Pulley (34). Attach the Pulley and a pair of Pulley Covers (35) to the bracket on the Top Frame (4) Covers (35) to the Offset Double “U”-bracket (42) with an M10 x 52mm Bolt (52) and an M10 Nylon with an M10 x 52mm Bolt (52) and an M10 Nylon...
  • Page 11 This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes.
  • Page 12 PART IDENTIFICATION CHART—Model No. WEEMSY18220 R0203A M6 x 63mm Screw (67) M8 x 63mm Bolt (66) M6 x 58mm Bolt (65) M8 Nylon Locknut (69) M8 x 64mm Shoulder Bolt (56) M10 Nylon Locknut (68) 19mm Round Inner Cap (22) M10 x 52mm Bolt (52) M10 x 65mm Bolt (55) M6 Nylon Locknut (72)
  • Page 13 PART LIST—Model No. WEEMSY18220 R0203A REMOVE THIS PART LIST/EXPLODED DRAWING FROM THE MANUAL. Key No. Qty. Description Key No. Qty. Description Base Press Frame Lock Stabiliser M6 x 16mm Screw Upright 50mm Square Outer Cap SAVE THIS PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE Top Frame Offset Double “U”-bracket Press Frame...
  • Page 14 EXPLODED DRAWING—Model No. WEEMSY18220 R0203A 73 67...

Table of Contents