Firmware Management - ABB RTU500 series User Manual

Management

Firmware Management

2.2 Firmware Management
2-2 | 1KGT 150 924 V000 1 - ABB AG
Figure 8: Configuration File Manager
Send file to device
Receive file from device
Delete file
Activate configuration
Backup configuration
Table 1: Configuration Management: Operation buttons on the left side of the tables
To navigate to the Firmware-File Manager page, click on "Management" and on "Firmware Manage-
ment" in the navigation frame. The different table columns show the properties of the different files.
With this button the configuration file can be downloaded to the RTU. First the config-
uration file must be dropped into the drop file area. Then the file can be downloaded
to the RTU. The downloaded file will become the new base configuration file. It must
be activated in a next step.
With this button the configuration file on the RTU can be uploaded to the PC.
With this button the configuration can be deleted.
By selecting this button the base or backup configuration will become the new active
configuration.
Press this button in the active configuration row to generate a new backup of the ac-
tive configuration. The new backup configuration will override an existing backup con-
figuration.
RTU500 series Remote Terminal Unit