Management; Configuration Management - ABB RTU500 series User Manual

RTU500 series Remote Terminal Unit

Management

Configuration Management

2 Management
2.1 Configuration Management
To navigate to the Configuration-File Manager page, click on "Management" and on "Configurations
Management" in the navigation frame. The different table columns show the properties of the dif-
ferent files.
Figure 7: Configuration files: navigation tiles
The files on the RTU will be displayed on top of this page. Below is the drop in area. Here you can drop
new configuration files to be downloaded to the RTU. Only one file is needed for the configuration
of an RTU: <name>.rcd (RTU configuration data)
On the RTU there can be stored 4 different RTUtil500 configuration files:
– Active: The active configuration file is at the moment executed by the RTU
– Backup: It is possible to store one backup copy of a configuration file. This file can be activated
again.
– Base: A configuration file downloaded from the PC will be shown as base configuration file
– Editing: A configuration file generated by the WebUI configuration is called editing
In addition the Integrated HMI project files can be downloaded with this page.
The different table columns show the properties of the different configuration files.
ABB AG - 1KGT 150 924 V000 1 | 2-1