User Management - ABB RTU500 series User Manual

RTU500 series Remote Terminal Unit

2.5 User Management

Figure 14: Change language of the Web server
All modification of user accounts are done via the RTU500 series Web server. In the Web server
menu the link "User Management" is the entry point for the user account management. This link can
be found under the menu item "Management" as shown in the figure below. Due to the sensible
information in the user account management the following notice has to be considered.
The web pages of this functionality require secure HTTPS access. It is not possible to open the
web pages with standard HTTP access.
Figure 15: Web server menu user account management
The link starts a user interface to modify the following properties:
• Enable or disable functional policies
• Enable or disable password policies
• Add new or delete existing user accounts
• Change user account passwords
• Add new or delete existing user roles
• Change assignments of user and permissions to/from user roles
The user interface for the account management consists of several menu tabs. The first 3 menu tabs
cover the password policies, the user accounts and the user roles. On each tab the corresponding
information are shown for display and modification.
Common for all menu tabs are 2 buttons at the top of each tab. These buttons control the changes
done by the administrator. At startup all control elements are disabled showing the current config-
uration. If changes shall be done the administrator just start to access the user interface. Then the
both control buttons get active. After finishing the administrator can accept and store the changes
A D V I C E
Management
User Management
ABB AG - 1KGT 150 924 V000 1 | 2-7