ABB RTU500 series User Manual page 48

Test & Simulation
Inputs and Outputs view - elements of the user interface
4-12 | 1KGT 150 924 V000 1 - ABB AG
Figure 61: Simulation of command reaction - delay parameter
In the user interface, the text of the output command signals whose command reactions are being
automatically simulated becomes italic.
Figure 62: Setting automatic simulation of command reactions
Disconnecting signals in both directions
It is possible for the user to select the disconnection of the signals shown in the signal grid in "Both"
directions.
Figure 63: Process connection - "Both" direction
When this option is chosen (with value set to "Disconnect" and after clicking on "Proceed"), the
process information inputs shown in the signals grid are disconnected from process in monitoring
direction, while the process command outputs are disconnected in controlling direction. The behav-
ior is the same described in Chapter , "Disconnecting signals in monitoring direction" and Chapter ,
"Disconnecting signals in controlling direction".
RTU500 series Remote Terminal Unit