ABB RTU500 series User Manual page 21

RTU500 series Remote Terminal Unit
The new password is checked against the policies rules when the button "OK" is selected. In case
of violations the password is declined, an error message is shown and a valid password must be
defined. The dialog can be finished by pressing the button "Cancel". In this case the password is
not changed and the old password is still valid.
Figure 18: Dialog to change the password of a user
In delivery status the RTU500 series contains the following predefined user accounts, with their
assigned user roles and their defined default user role:
Default Default
user name password
Show Show
Load Load
Control Control
Admin Admin
Operator Operator
Default Default
Table 4: Default user accounts in the RTU
During migration from the previous RTU560 user account management (before release 12) the ex-
isting user accounts are taken as they are. That means user names, passwords and role assign-
ments remains unchanged after the migration.
Assigned user roles
Viewer
Installer
Installer
Engineer
Engineer
Administrator
Operator
Viewer
Operator
Installer
Engineer
SECAUD
RBACMNT
SECADM
Administrator
Management
User Management
Default user role
Viewer
Installer
Installer
Engineer
Operator
Viewer
ABB AG - 1KGT 150 924 V000 1 | 2-11