Operation; Starting The Integrated Hmi; General Overview: Archives - ABB RTU500 series User Manual

RTU500 series Remote Terminal Unit

5 Operation

5.1 Starting the Integrated HMI

5.2 General Overview: Archives

The Integrated HMI can be started directly from the navigation tile (see below) or from the 'Hardware
Tree'. This feature is only available, if an 'Integrated HMI' is configured.
Figure 73: Starting the Integrated HMI
Before an HMI application can be started, the following files must be uploaded to the RTU:
• HMILib.jar (using the Firmware File Manager (see chapter Chapter 2.2))
• HMILibInterface.jar (using the Firmware File Manager (see chapter Chapter 2.2))
• HMI Application (using the Configuration File Manager (see chapter Chapter 2.1))
This feature is available:
– an 'Integrated HMI' is configured.
– the user has the privileges to use the integrated HMI (see chapter Chapter 2.5.3)
Archives are stored on the memory card of a communication unit. RTU500 series supports follow-
ing archives:
– Process Archives (see Chapter 5.3, "Process Archives")
– File Archives (see Chapter 5.4, "File Archive")
– Security Event Archive (see Chapter 5.5, "Security Event Archive")
The archive size can be configured with RTUtil500 [2].
Operation
Starting the Integrated HMI
ABB AG - 1KGT 150 924 V000 1 | 5-1