Proaim 7' WAVE-2 VIDEO JIB CRANE With CST-100 Stand & portable Dolly
YOUR PROAIM 7' WAVE DSLR VIDEO JIB ARM WITH TRIPOD STAND
NOTE: Add weights to the rear of jib corresponding to the weight of camera attached to
balance the jib arm.
ASSEMBLING YOUR PROAIM 7' WAVE
DOLLY
Take out the bolt from the center of dolly and spread it on floor. Then put the bolt back
through the center of dolly again.
ALL SET AND READY TO USE
(SHOWN WITH OTPIONAL ACCESSORIES)
-2 JIB WITH CST-100 STAND, PORTABLE
6