PROAIM P-WV-2SD Instruction Manual page 5

Proaim 7' WAVE-2 VIDEO JIB CRANE With CST-100 Stand & portable Dolly

Then, loosen the knob provided at the lower
telescopic section of the jib arm as shown in
the picture to extend the front section of the
telescopic jib accordingly to the rear section.

Attach the weight shanks at the rear end of
the jib section by screwing it in and then add
weights to it.
NOTE: Make sure the opposite end of the jib arm
is secured so that the addition of the weights
does not cause the arm to rise violently.

Camera head mount is provided with a knob
to control 90 degree tilt movement of the
camera.

Loosen the knob for the free tilt movement
of the camera and tighten it to lock the
movement.

Mount your fluid head onto the bowl plate in order to attach the camera. And then finally,
secure your camera properly on the fluid Head.
5