PROAIM P-WV-2SD Instruction Manual page 3

Proaim 7' WAVE-2 VIDEO JIB CRANE With CST-100 Stand & portable Dolly
ASSEMBLING YOUR PROAIM 7' WAVE JIB WITH 100MM TRIPOD STAND AND
SPREADER

Take out the spreader and open it's legs as shown in the image.

Position the height of the tripod by loosening all three adjustment knobs, sliding the tripod
up to the desired height and re-tighten the knobs securely.

Now, place the tripod foot on the
spreader and tie down it with the help of
elastic clip downs as shown in the
picture.
3