Kontron mITX-SKL-S-C236 User Manual page 48

Sub-Screen Function
ME Unconfig on RTC Clear
Comms Hub Support
JHI Support
Core Bios Done Message
Firmware Update Configuration
PTT Configuration
ME Debug Configuration
RTD3 RTD3 Support
settings
VR Staggering delay
VR Ramp up delay
PCIE Slot 5 Device Power-on delay in ms
PCIE Slot 5 Device Power-off delay in ms
Audio Delay
I2C0 Controller
PTT Capability/State
TPM Device Selection
PTP aware OS
HECI Timeouts
Force ME DID Init Status
CPU Replaced Polling
Disable
ME DID Message
HECI Retry Disable
HECI Message check
Disable
MBP HOB Skip
HECI2 Interface
Communication
KT Device
IDER Device
End Of Post Message
DOI3 Setting for HECI
Disable
www.kontron.com
mITX-SKL-S-C236 Doc. Rev. 1.1
Description
Display ME Unconfig on RTC Clear
Enable/Disable support for Comms Hub
Enable/Disable Intel® DAL Host
Interface Service (JHI)
Enable/Disable Core Bios Done message
sent to ME
Enable/Disable Me FW Image Re-Flash
function
Display PTT Capability/State
Selects TPM device: PTT or dTPM
Display PTP aware OS
Enable/Disable HECI Send/Receive
Timeouts
Force the DID Initialization Status value
Setting this option disables CPU
replacement polling loop
Enable/Disable ME DID Message
Setting this option disables retry
mechanism for all HECI APIs
Setting this option disables message
check for Bios Boot Path when sending
Setting this option will skip MBP HOB
Adds and Removes HECI2 Device from
PCI space
Enable/Disable KT Device
Enable/Disable IDER Device
Enable/Disable End Of Post Message
sent to ME
Setting this option disables setting DOI3
bit for all HECI devices
Enable/Disable Runtime D3 Support
Delay between subsequent VR power on
to avoid current spike
Delay between subsequent VR ramp ups
if they are all turn ON at the same time
Delay between applying core power and
Deasserting PERST#
Delay after removing core power
Delay after applying power to HD
Audio(Realtex) codec device
Delay in _PSO I2C0 Controller
// 48