Kontron mITX-SKL-S-C236 User Manual page 46

Sub-Screen Function
GT – Power
Managemen
t Control
PCH-FW ME Firmware Version
Configuration
ME Firmware Mode
ME Firmware SKU
ME File System Integrity Value
ME Firmware Status 1
ME Firmware Status 2
NFC Support
ME State
Manageability
IO MWAIT Redirection
Package C State Limit
C3 Latency Control (MSR 0X60A)
C6/7 Short Latency Control (MSR
0X60B)
C6/7 Long Latency Control (MSR
0X60C)
Thermal Monitor
Interrupt Redirection Mode Selection
Timed MWAIT
Custom P-state Table
Energy performance gain
EPG DIMM Idd3N
EPG DIMM Idd3P
Power Limit 3 Settings
CPU Lock CFG Lock
Configuration
Overclocking Lock
RC6 (Render Standby)
Maximum GT frequency
www.kontron.com
mITX-SKL-S-C236 Doc. Rev. 1.1
Description
When set, will map IO_read instructions
sent to IO registers
PMG_IO_BASE_ADDRBASE+off set to
MWAIT(offset)
Maximum Package C State Limit Setting
Setting of Time Unit (Unit of
measurement for IRTL value) and
Latency
Setting of Time Unit (Unit of
measurement for IRTL value) and
Latency
Setting of Time Unit (Unit of
measurement for IRTL value) and
Latency
Enable/Disable Thermal Monitor
Interrupt Redirection Mode Select for
Logical Interrupts
Enable/Disable Timed MWAIT
Display Number of P states
Enable/Disable Energy performance
gain
Display EPG DIMM Idd3N
Display EPG DIMM Idd3P
Enable/Disable Power Limit 3 Override
Configure MSR 0XE2[15], CFG Lock bit
Enable/Disable Overclocking Lock
Check to enable render standby support
Choose between 350MHz (RPN) and
1000MHz (RPO). Value beyond the range
will be clipped to min/max supported by
SKU
Display ME Firmware Version
Display ME Firmware Mode
Display ME Firmware SKU
Display ME File System Integrity Value
Display ME Firmware Status 1
Display ME Firmware Status 2
Display NFC Support
Display ME State
Display Manageability
// 46