Restore Factory Defaults; Enable/Disable Ean-8; Transmit Check Character - Newland HR42 Halibut User Manual

EAN-8

Restore Factory Defaults

Enable/Disable EAN-8

** Enable EAN-8
If the scanner fails to identify EAN-8 barcodes, you may first try this solution by scanning the Enter
Setup barcode and then Enable EAN-8 barcode.

Transmit Check Character

EAN-8 is 8 digits in length with the last one as its check character used to verify the integrity of the data.
** Transmit EAN-8 Check Character
63
Restore the Factory Defaults of EAN-8
Disable EAN-8
Do Not Transmit EAN-8 Check Character
Enter Setup
** Exit Setup