Advanced Features - AnyTone AT-D868UV Operating Manual

Advanced features for Private Call
Method 1: Access from Contact list
1. Press the Exit key to enter the Contact list, press the UP/DOWN key
to a private call ID name.
2. Press Select to View Contact, press Select to see the contact
information.
3. Press Option to access the advanced features.
Method 2: Access from Manual Dial
1. Press the Menu key to enter Contacts, press UP/DOWN key to
Manual Dial.
2. Press Select to enter Manual Dial.
3. Input the Private ID, press Option to access the advanced features.

Advanced features

1.Call Alert
Select Call Alert, it will send out a call alert, the target radio will sound
a beep or vibrate when receiving the call alert, and it will return a
success call or failed call message to the transmit radio.
2.Remote Monitor
Select Remote Monitor, and it will send out a signal for the target radio
will turn on its microphone and transmit when receiving the signaling, it
will send back the voice to the transmit radio. With this feature you can
monitor the sound activity near the target radio remotely.
3.Get GPS info
Select Get GPS info, and it will send out a signal to the target radio
which will start the GPS positioning and send a message of its GPS
position to the transmit radio.
4.Check Radio
Select Check Radio, and it will send out a radio check to the target
radio which will send back a message if it is available or not available
to the transmit radio. With this feature, you can determine if another
radio is active and powered on in the system.
AT-D868UV Digital DMR and Analog UHF/VHF Two Way Radio
17