Advanced Operations - AnyTone AT-289 Instruction Manual

ADVANCED OPERATIONS

The [PF1 PF2
programming software.
Call 1/Call 2
the
Monitor
Under the standby conditions, pressing the programmed key of monitor [PF1
transceiver emits "DU" beep and then comes into the monitor state. Under these conditions,
receiving the matched carrier wave. Press this key again, transceiver emits "DU DU" beep and exits
the monitor state.
Momentary Monitor
Under the standby conditions, press and hold the programmed key of momentary monitor [PF1
PF1 PF2
PF2
Professional
17
FM Transceiver