AnyTone AT-D868UV Operating Manual page 35

8. Band Width
Choose wide band or narrow band for the analog channel.
9.Reverse
When this function is enabled, the RX frequency, TX frequency and
CTCSS/DCS encode/decode will be reversed.
14.Busy Lock
Always: Always allows transmissions
RL: Will not allow transmit when receiving matched carrier but
unmatched CTCSS/DCS.
BU: Will not allow transmit when receiving matched carrier.
16. OWN ID
When the analog channel set up with optional signal, you can check
the radio ID number in this menu. The ID number should be set up in
PC software – Analog – Analog Address Book.
17. DTMF Enc
Set a DTMF ID as the default call ID for the current channel.
Press the PTT key to transmit the selected DTMF ID.
Edit the DTMF ID in Menu or with the PC programing software.
18. 2Tone Enc
Set a 2Tone as the default call ID for the current channel.
Press the PTT key to transmit the selected 2Tone.
Edit the 2Tone in the PC programing software before it can be
selected.
19. 5Tone Enc
Set a 5Tone as the default call ID for the current channel.
Press the PTT key to transmit the selected 5Tone.
Edit the 5Tone in the PC programing software before it can be
selected.
6.3 Device Info
Show the Radio ID, Radio name, serial number, model name,
frequency range, firmware version, radio data version, latest program
date, picture version, language version etc.
29
AT-D868UV Digital DMR and Analog UHF/VHF Two Way Radio