AnyTone AT-D868UV Operating Manual page 13

1.11 Installing / Removing the Antenna
1. Installing the Antenna: Screw the antenna into the connector on the
top of the transceiver by holding the antenna at its base and turning
it clockwise until secure.
2. Removing the Antenna: Turn the antenna counter-clockwise to
remove it.
1.12 Installing / Removing the Belt Clip
1. Installing the Belt Clip: Place the belt clip above the corresponding
holes on the back of the radio, and screw it into place clockwise with
the two supplied screws.
2. Removing the Belt Clip:Unscrew counter-clockwise to remove the
belt clip.
7
AT-D868UV Digital DMR and Analog UHF/VHF Two Way Radio