AnyTone AT-D868UV Operating Manual page 33

7. Name
Allow reset the channel name, this function is only valid in channel
mode.
8. TX Permit
Always: Always allow transmit
BU: Allow transmit when the channel is free
CD: Allow transmit when receive matched signal but different color
code.
CE: Allow transmit when receive matched signal and same color code.
9. TX Prohibit
TX ON: Will allow transmit on the current channel.
TX OFF: Will not allow transmit on the current channel.
10. Radio ID
In Digital channel, it will show the DMR ID which must be programmed
in the PC software – Digital – DMR ID list- DMR ID. Allows edit and
select an ID for the channel, each channel allows one ID.
In Analog channel, it will show the radio self ID which is programmed
in PC software – Analog –Analog Address Book – Number.
11. Colour Code
T h e d i g i t a l c h a n n e l s h o u l d h a v e t h e s a m e c o l o r c o d e f o r
communication as defined by the repeater to be used; which can be
programmed in the PC software or defined in the Menu.
12. Slot Set
Set up Slot 1 or Slot 2 for the current channel.
13. Digi Encrypt
With the digital encryption, the communication will be confidential. A
total of 32 digital encryptions is offered, and it can be programmed in
the PC software or defined in the Menu.
14. Encrypt Type
Choose normal encryption or enhanced encryption type.
15. Work Alone
In the PC software – Public – Alarm settings – Work Alone, you have
to set up the response time, warn time and response method initially.
Turn on the work alone function for the current channel. When the
27
AT-D868UV Digital DMR and Analog UHF/VHF Two Way Radio