Brake Pad Display - SMART Fortwo coupe 2007 Operating Instructions Manual

What to do when ...
Engine check indicator lamp
Illuminates:
• when the ignition is switched on.
The indicator lamp goes out after the engi
ne is started or after ten seconds if the en
gine electronics are functioning properly.
• while en route:
> Find a qualified specialist workshop imme
diately, e.g. a smart center.
200
>> Practical advice.
Engine
The engine will not start:
> Check that
• the gearshift lever is in position N,
• the brake pedal has been pressed,
• the gear indicator in the multi function dis
play shows an N.
The engine does not start within four seconds:
> Wait a moment.
> Repeat the start process.
The engine will not start at all:
> When you exit the vehicle, secure it against
rolling away with the handbrake.
> Call a breakdown recovery service such as
smartmove Assistance or a qualified speci
alist workshop such as a smart center.
Keys
If you have lost the key to the car, you can get
a spare key from a qualified specialist work
shop (such as a smart center) following an
identity check.
Acoustic warning signals
Mechanical/acoustic brake pad display
The car is equipped with a mechanical/acous
tic brake pad display. If you can hear a conti
nuous noise from the front axle when braking,
you should take the car to a qualified specia
list workshop, e.g. a smart center.