Using The Dhcp Lease Option; Using The Wlan Option - Ubee UBC1301-AA00 User Manual

Ubee Interactive
Label
Enable Rapid
Commit
Enable Unicast
Save/Apply
6.2.3

Using the DHCP Lease Option

Use the DHCP Lease option to view current LAN DHCP lease information.
To view DHCP lease settings:
1. Click LAN from the left side menu.
2. Click DHCP Lease under LAN.
Field descriptions are listed below the screen example.
Hostname
MAC Address
IP Address
Expires in
6.3

Using the WLAN Option

Use the WLAN (wireless local area network) option to configure wireless network settings.
For assistance in deploying and troubleshooting the wireless network, refer to
and Troubleshooting the Wireless Network on page
To view and configure wireless information:
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017
Enables Rapid Commit. When enabled, the server recognizes this option in Solicit messages
sent from the DHCPv6 client. The server and client then use a two-message exchange (Solicit
and Reply) to configure clients, rather than the default four-message exchange (Solicit,
Advertise, Request, and Reply). This provides faster client configuration when networks are
under heavy traffic loads.
Enables Unicast, which is disabled by default. Unicast transmission is defined to be between a
single sender and a single user over a network.
Saves changes.
Label
Displays the host name.
Displays the IP address of the client.
Displays the MAC address of the client.
Displays the time until the DHCP lease expires.
Description
Description
50.

Using the WLAN Option

Deploying
41