Using The Dhcp Lease Option - Ubee UBC1303 User Manual

Ubee Interactive
Label
Enable Rapid
Commit
Enable Unicast
Save/Apply
6.2.3

Using the DHCP Lease Option

Use the DHCP Lease option to view current LAN DHCP lease information.
To view DHCP lease settings:
1. Click LAN from the left side menu.
2. Click DHCP Lease under LAN.
Field descriptions are listed below the screen example.
Hostname
MAC Address
IP Address
Expires in
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Enables Rapid Commit. When enabled, the server recognizes this option in Solicit
messages sent from the DHCPv6 client. The server and client then use a two-message
exchange (Solicit and Reply) to configure clients, rather than the default four-message
exchange (Solicit, Advertise, Request, and Reply). This provides faster client configuration
when networks are under heavy traffic loads.
Enables Unicast, which is disabled by default. Unicast transmission is defined to be
between a single sender and a single user over a network.
Saves changes.
Label
Displays the host name.
Displays the IP address of the client.
Displays the MAC address of the client.
Displays the time until the DHCP lease expires.
Description
Description
Using the LAN Options
46