Using The Basic Option - Ubee UBC1301-AA00 User Manual

Ubee Interactive
1. Click Gateway from the main menu.
2. Click WLAN on the left side menu.
3. The following sub-menus are available for selection:
Using the Basic Option on page 42
Using the Security Option on page 44
Using the WPS Option on page 45
Using the Access Control Option on page 46
Using the WMM Option on page 48
6.3.1

Using the Basic Option

The WLAN Basic option allows you to configure basic settings for both the 2.4GHz and
5GHz radio bands, including channel number and bandwidth control. You can also
change the SSID (wireless network name) here.
NOTE: The UBC1301-AA00 is a dual-band concurrent wireless gateway, supporting
operation of both the 2.4GHz and 5GHz radio bands simultaneously. Both radios are
enabled by default.
To configure basic wireless settings:
1. Click WLAN from the left side menu.
2. Click Basic under WLAN.
Field descriptions follow the screen example.
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017
Using the WLAN Option
42