Ubee UBC1301-AA00 User Manual page 68

Ubee Interactive
Label
Type
Local IP
Local Start Port
Local End Point
External Start Port
External End Port
Protocol
Description
Enabled
Apply
Cancel
5. Click Apply. The forwarding rule is created and displayed in the table as shown
below. Additional field descriptions follow.
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017
Allows you to select either IPv4 or IPv6.
Defines the IP address of the local LAN device to which the forwarding rule applies. For
example, an Xbox or PC.
Defines the starting port number listened to by the server host located in your LAN.
Defines the ending port number listened to by the server host located in your LAN.
Defines the port number to start the range of ports to publish to the Internet.
Defines the port number to end the range of ports published to Internet.
Note: Be very careful with ranges. Ports within a range are not usable by other
applications that may require them. It is common and safer to enter the same port
number as the start and end of the range.
Selects the protocol type. Options are TCP, UDP or TCP/UDP.
Specifies the forwarding rule name.
Disables (Off) or enables (On) the forwarding rule.
Saves the forwarding rule.
Cancels the rule.
Using the Advanced Settings Options
Description
63