Ubee UBC1301-AA00 User Manual page 71

Ubee Interactive
4. Enter information in the port trigger fields as shown in the screen shot below. Field
descriptions follow.
Label
Trigger Start Port
Trigger End Port
Target Start Port
Target End Port
Protocol
Description
Enabled
Apply
Cancel
5. Click Apply. The triggering rule is created and displayed in the table as shown below.
Additional field descriptions follow.
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017
Defines a port number or the starting port number in a range of port numbers.
Defines a port number or the ending port number in a range of port numbers.
Defines a port number or the starting port number in a range of port numbers.
Defines a port number or the ending port number in a range of port numbers.
Defines the protocol type for this rule, UDP, TCP, or Both.
Names the triggering rule.
Enables (on) or disables (off) the triggering rule.
Saves the triggering rule.
Cancels the triggering rule.
Using the Advanced Settings Options
Description
66