Display Mdc Resource - HPE FlexNetwork 10500 series Command Reference Manual

display mdc resource

Use display mdc resource to display the CPU, disk space, and memory usage of the current MDC.
Syntax
In standalone mode:
display mdc resource [ cpu | disk | memory ] [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
display mdc resource [ cpu | disk | memory ] [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
mdc-admin
mdc-operator
Parameters
cpu: Displays the CPU usage.
disk: Displays the disk space usage.
memory: Displays the memory space usage.
slot slot-number: Specifies a card. If you do not specify this option, the command displays the usage
on all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. If you do not
specify this option, the command displays the usage on all cards in the IRF fabric. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number. If you do not specify this option, the command
displays the usage on CPU 0.
Examples
# (In standalone mode.) Display the CPU, disk space, and memory space usage of the MDC on all
cards.
<sub1> display mdc resource
Memory usage:
slot 0 CPU 0:
Used 21.8MB, Free 687.0MB, Total 708.8MB
ID Name
2 sub1
slot 7 CPU 0:
Used 378.8MB, Free 7565.9MB, Total 7944.6MB
ID Name
2 sub1
CPU usage:
slot 0 CPU 0:
ID Name
2 sub1
slot 7 CPU 0:
ID Name
2 sub1
Quota(MB) Used(MB)
708.8 4.8
Quota(MB) Used(MB)
7944.6 45.6
Weight Usage(%)
2 0
Weight Usage(%)
2 0
56
Available(MB)
687.0
Available(MB)
7565.9