Usage guidelines
To bind physical interfaces to an IRF port, you must enter IRF port view.
Before you remove all port bindings on an IRF port, shut down all its physical interfaces.
Examples
# (In IRF mode.) Enter the view of IRF-port 1 on member 1.
<Sysname> system-view
[Sysname] irf-port 1/1
[Sysname-irf-port1/1]
Related commands
port group interface
irf-port port-number
Use irf-port port-number to enter IRF port view in standalone mode.
Use undo irf-port port-number to remove all port bindings on an IRF port in standalone mode.
Syntax
irf-port port-number
undo irf-port port-number
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies an IRF port number, which must be 1 or 2.
Usage guidelines
To bind physical interfaces to an IRF port, you must enter IRF port view.
Before removing all port bindings on an IRF port, shut down all its physical interfaces.
Examples
# (In standalone mode.) Enter IRF-port 1 view.
<Sysname> system-view
[Sysname] irf-port 1
[Sysname-irf-port1]
Related commands
port group interface
irf-port-configuration active
Use irf-port-configuration active to activate IRF port settings.
Syntax
irf-port-configuration active
21