HPE FlexNetwork 10500 series Command Reference Manual page 11

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
irf-port: Displays IRF port-specific load sharing modes. If you do not specify this keyword, the
command displays the global load sharing mode for IRF links.
member-id/irf-port-number: Specifies an IRF port number. The member-id argument represents an
IRF member ID. The irf-port-number argument represents the index number (1 or 2) of the IRF port
on the member device. If you do not specify the member-id and irf-port-number arguments, this
command displays the load sharing mode used on each IRF port in the IRF fabric. If no IRF ports are
in up state, this command displays No IRF link exists.
Examples
# Display the global load sharing mode for IRF links. In this example, because no user-defined global
load sharing mode has been configured, the default global load sharing mode applies.
<Sysname> display irf-port load-sharing mode
irf-port Load-Sharing Mode:
Layer 2 traffic: destination-mac address
Layer 3 traffic: destination-ip address
Layer 4 traffic: destination-port
# Display the load sharing mode of IRF-port 1/1. In this example, because neither port-specific load
sharing mode nor user-defined global load sharing mode has been configured, the default global
load sharing mode applies.
<Sysname> display irf-port load-sharing mode irf-port 1/1
irf-port1/1 Load-Sharing Mode:
Layer 2 traffic: destination-mac address, source-mac address
Layer 3 traffic: destination-ip address,
Layer 4 traffic: destination-port,
# Display the load sharing mode used on each IRF port.
<Sysname> display irf-port load-sharing mode irf-port
irf-port 1/1 Load-Sharing Mode:
destination-mac address
Table 6 Command output
Field
irf-port Load-Sharing Mode
irf-port1/1 Load-Sharing Mode
source-mac address
source-ip address
source-port
source-ip address
source-port
Description
Global load sharing mode for IRF links:
•
If no global IRF link load sharing mode has been configured,
the default global load sharing mode applies.
•
If a user-defined global load sharing mode has been
configured, the configured mode applies.
Link load sharing mode of IRF-port 1/1:
•
If you have not configured a port-specific load sharing mode,
the global IRF link load sharing mode applies.
•
If you have configured a port-specific load sharing mode, the
7