Irf Mode - HPE FlexNetwork 10500 series Command Reference Manual

Field
PEX status
Member interfaces
Member interface
Status
Peer interface
No member interface.

irf mode

Use irf mode to configure the IRF mode.
Use undo irf mode to restore the default.
Syntax
irf mode { enhanced | light | normal }
undo irf mode { enhanced | light }
Default
The device operates in normal IRF mode to provide IRF capability.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
enhanced: Specifies enhanced IRF mode. In this mode, the device can operate as a parent device
in an eIRF system. This mode supports more PEXs than light mode.
light: Specifies light IRF mode. In this mode, the device can operate as a parent device in an eIRF
system. This mode supports fewer PEXs than enhanced mode.
normal: Specifies normal IRF mode. In this mode, eIRF capability is disabled. The device can only
form an independent IRF fabric with other devices.
Description
An asterisk (*) indicates that the PEX is directly connected to the
parent fabric.
PEX status:
•
Online—The PEX is online.
•
Offline—The PEX is offline.
•
Loading—The PEX is starting up.
Number of physical interfaces assigned to the PEX port on the
parent fabric.
Physical interfaces assigned to the PEX port on the parent fabric.
PEX link status:
•
Forwarding—The PEX link is operating correctly and can
forward data traffic.
•
Down—The PEX link is disconnected and cannot forward
any packets.
•
Blocked—The PEX link cannot forward any packets except
for eIRF packets.
PEX physical interface on the PEX. This field displays two
hyphens (--) if the system cannot obtain the interface name.
No physical interfaces have been assigned to the PEX port.
36