Default
PEX port description uses the pex-port pex-number format (for example, pex-port 0002).
Views
PEX port view
Predefined user roles
network-admin
mdc-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 79 characters.
Examples
# Configure the description as connecttodep2 for PEX port 2.
<Sysname> system-view
[Sysname] pex-port 2
[Sysname-pex-port2] description connecttodep2
display pex working-mode
Use display pex working-mode to display the operating mode configuration of PEXs in the eIRF
system.
Syntax
display pex working-mode { all | chassis chassis-number slot slot-number1 [ to slot-number2 ] }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
all: Specifies all PEXs.
chassis chassis-number: Specifies a PEX by its virtual chassis number. Available values are the
virtual chassis numbers of all PEXs.
slot slot-number1: Specifies a PEX in the virtual chassis. In the current software version, a virtual
chassis can contain only one PEX.
slot slot-number1 to slot-number2: Specifies a range of PEXs in the virtual chassis. In the current
software version, a virtual chassis can contain only one PEX.
Examples
# Display the operating mode configuration of all PEXs.
<Sysname> display pex working-mode all
PEX device mode Configuration:
Switch mode at startup:
None
33