Table Of Entity Parameters; Battery Warning Label - FLIR GFx320 User Manual

2
Safety information
CAUTION
Applicability: Cameras with one or more batteries.
When the battery is worn, apply insulation to the terminals with adhesive tape or equivalent materials
before you discard it. Damage to the battery and injury to persons can occur if you do not do this.
CAUTION
Applicability: Cameras with one or more batteries.
Remove any water or moisture on the battery before you install it. Damage to the battery can occur if
you do not do this.
CAUTION
Do not apply solvents or equivalent liquids to the camera, the cables, or other items. Damage to the bat-
tery and injury to persons can occur.
CAUTION
Be careful when you clean the infrared lens. The lens has an anti-reflective coating which is easily dam-
aged. Damage to the infrared lens can occur.
CAUTION
Do not use too much force to clean the infrared lens. This can cause damage to the anti-reflective
coating.
CAUTION
Applicability: Cameras with a viewfinder.
Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams
can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.
Note The GPS module cannot retrieve GPS data when the camera is used inside build-
ings. Further, displaying GPS data is dependent on many factors, such as terrain, high
buildings around the camera, and the number of detected satellites.

2.2.1 Table of entity parameters

The table shows the maximum input parameters for each port of the camera.
Table 2.1 Table of entity parameters
Parameter (see note) USB mini-B
U 6 V
i
I 5 mA
i
__
U
m
U = the maximum input voltage.
i
I = the maximum input current.
i
U = the maximum r.m.s. AC or DC voltage.
m

2.2.2 Battery warning label

The following warning label is affixed to the inside of the back cover:
#T810169; r. AN/42241/42268; en-US
HDMI Battery pack charge
port
4 V __
25 µA __
__
100 V
8