Procedure; Changing The Camera Temperature Range; General - FLIR E6-XT User Manual

7
Operation
Automatic
7.14.2.2 Example 2
Here are two infrared images of an isolator in a power line. To make it easier to analyze
the temperature variations in the isolator, the temperature scale in the right image has
been changed to values close to the temperature of the isolator.
Automatic

7.14.3 Procedure

Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Temperature scale
3. On the toolbar, select one of the following:
• Auto .
• Manual .
4. To change the temperature span and the temperature level in Manual mode, do the
following:
• Push the navigation pad left/right to select (highlight) the maximum and/or mini-
mum temperature.
• Push the navigation pad up/down to change the value of the highlighted
temperature.

7.15 Changing the camera temperature range

7.15.1 General

The camera is calibrated for different temperature ranges. Available temperature range
options are dependent on the camera model.
For accurate temperature measurements, you must change the Camera temperature
range setting to suit the expected temperature of the object you are inspecting.
#T559828; r. AP/56791/57153; en-US
Manual
Manual
. This displays a toolbar.
19