Programming The Camera; General; Procedure - FLIR GFx320 User Manual

21

Programming the camera

21.1 General

You can program the camera to save images periodically.

21.2 Procedure

Follow this procedure to make the camera save images periodically:
1. Turn the mode wheel to
2. Move the joystick up/down to select Setup.
3. Push the joystick. This will display the following dialog box:
4. Push the joystick.
5. Use the joystick to set the following:
• The type of images to save (IR image, Digital photo, IR and digital).
• The time period between which the camera will save an image (hours, minutes,
seconds).
• The stop condition (timer, counter, manual)
• The timer or counter settings, if you selected one of these as stop condition.
6. Push the button.
7. Move the joystick up/down to select Start.
8. Push the joystick to start the periodic saving.
#T810169; r. AN/42241/42268; en-US
. This will display the following dialog box:
66