Microchip Technology XLP User Manual page 11

DOCUMENT REVISION HISTORY
Revision A (October 2009)
• Initial release of this document.
Revision B (June 2010)
• Revises
reflecting the inclusion of driver software in the software installation package.
• Revises
application description and new application flow diagram for the current revision of
the demo application.
• Adds
options in the most current revision of the demo application.
• Revises
information on compatible PICtail Plus daughter boards and a new current
measurement cable.
• Corrects the ICD/ICSP™ connectors in
Kit
• Other minor typographic corrections throughout.
Revision C (April 2015)
• Removes all references to software support for the energy harvesting
applications.
• Adds a note to the list of board features in
Features", explaining that energy harvesting applications are no longer supported.
• Updates the driver installation procedure in
Software and Driver"
• Inserts the most current version of the European Union Declaration of Conformity
for development and evaluation tools, starting at page 3; all subsequent content is
renumbered accordingly.
• Updates document control number format to the current 8-digit standard.
• Other minor typographic corrections throughout.
 2009-2015 Microchip Technology Inc.
Section 2.1 "Initial Setup"
Section 2.2 "Demonstration Program Operation"
Section 2.2.1 "Demo Program Configuration"
Chapter 3. "XLP 16-Bit Development Board Hardware"
Schematics".
to conform with current software distribution practices.
with a simplified installation procedure,
with a modified
to describe configuration
Figure A-1 of Appendix A."Development
Section 1.4 "Development Board
Section 2.1.2 "Installing the
Preface
with additional
DS50001873C-page 11