Rejecting Calls - Polycom SoundPoint 560 User Manual

Note

Rejecting Calls

Note
To set a distinctive ring type for a particular contact:
1. Press
2. Select Contact Directory.
3. Use and
You can also use the * key to Page Up and the # key to Page Down.
4. Press the Edit soft key and scroll down to the Ring Type field.
5. Enter the number corresponding to one of the ring types available.
For more information, refer to
6. (Optional) To remove an existing value, press
7. Press the Save or Cancel soft keys to accept or cancel changes.
8. Press
display.
This feature is local to the phone, and may be overridden by your organization's
settings. For more information, contact your system administrator.
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail.
Rejecting calls is not available on shared lines.
To send incoming calls from a particular contact directly to voice mail:
1. Press
2. Select Contact Directory.
Customizing Your SoundPoint IP® 560 Phone
.
to scroll through the list to find the contact.
Headset Hookswitch
or the Exit soft key repeatedly to return to the idle
.
on page 2-7.
followed by .
2 - 19