Debug Ssh Server - Allied Telesis CentreCOM GS948MPX Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

DEBUG SSH SERVER

debug ssh server
Overview This command enables the SSH server debugging facility. When enabled, the SSH
server sends diagnostic messages to the system log. To display the debugging
messages on the terminal, use the terminal monitor command.
The no variant of this command disables the SSH server debugging facility. This
stops the SSH server from generating diagnostic debugging messages.
debug ssh server [brief|full]
Syntax
no debug ssh server
Default SSH server debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Examples To start SSH server debugging, use the command:
awplus#
To start SSH server debugging with extended output, use the command:
awplus#
To disable SSH server debugging, use the command:
awplus#
Related debug ssh client
Commands
show ssh server
undebug ssh server
C613-50181-01 Rev B
Parameter Description
brief
Enables brief debug mode.
full
Enables full debug mode.
debug ssh server
debug ssh server full
no debug ssh server
Command Reference for GS900MX Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1683