Certification; Agency Approvals; Fcc Compliance; Industry Canada Compliance - Siemens RUGGEDCOM RSG2488 Installation Manual

RUGGEDCOM RSG2488
Installation Guide

Certification

The RSG2488 device has been thoroughly tested to guarantee its conformance with recognized standards and
has recieved approval from recognized regulatory agencies.
• Section 6.1, "Agency Approvals"
• Section 6.2, "FCC Compliance"
• Section 6.3, "Industry Canada Compliance"
• Section 6.4, "EMI and Environmental Type Tests"
Section 6.1

Agency Approvals

The RSG2488 has received approval from various agencies.
Agency
FCC
CE
TUV
Industry Canada (IC)
FDA/CDRH
Section 6.2

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Section 6.3

Industry Canada Compliance

CAN ICES-3 (A) / NMB-3 (A)
Agency Approvals
Standards
FCC Part 15
EN 55022, EN 61000-3-2, EN
61000-3-3, EN 61000-6-2, EN
60950-1, EN 60825-1, EN 50581
IEC 60950-1, EN 60950-1, CSA/UL 60950-1
ICES-003
21 CFR Chapter I, Sub-chapter J
Comments
Class A for USA
EU directives include 2004/108/EC
(EMC Directive), 2011/65/EU (ROHS)
and 2006/95/EC (Low Voltage Directive)
International Safety Compliance
Class A for Canada
Compliant
Chapter 6
Certification
37