Sfp Optic Ethernet Ports - Siemens RUGGEDCOM RSG2488 Installation Manual

Chapter 3
Communication Ports
1
Figure 25: LC Port (05, 07, 10, 17, 19)
1. Tx Connector 2. Rx Connector
Figure 27: ST Port (13, 15)
1. Tx Connector 2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
Section 3.3

SFP Optic Ethernet Ports

SFP (Small Form-Factor Pluggable) optic Ethernet ports are available with LC (Lucent Connector) connectors.
Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly connected and matched to
establish a proper link.
Figure 28: LC Port (09, 11, 12, 67, 68, 69, 70)
1. Tx Connector 2. Rx Connector
NOTE
SFP modules, as well as their optical ports, can be safely inserted and removed while the chassis is
powered and operating.
The following sections describe how to install and remove SFP optical ports:
• Section 3.3.1, "Installing an SFP Optical Port"
• Section 3.3.2, "Removing an SFP Optical Port"
22
2
Figure 26: SC Port (06)
1. Tx Connector
1
1
1
2. Rx Connector
2
Section 4.4, "Fiber Optic Ethernet Port
2
SFP Optic Ethernet Ports
RUGGEDCOM RSG2488
Installation Guide
2