PowerBox Systems cockpit Instruction Manual page 15

The on-screen arrows should now be located in front of UP/DOWN. If you
find that your retract switch works in the wrong "sense" (direction), correct it
by reversing that output at the transmitter.
Press the SET button again to leave this function, and move the cursor to OK.
The door sequencer's method of working is determined in the following
menu:
The following sequences are available:
Mode 1:
Extend undercarriage:
Open wheel doors
Retract undercarriage:
Retract undercarriage
Mode 2:
Extend undercarriage:
Open nosewheel doors
Open main wheel doors
doors
Retract undercarriage:
Retract nosewheel
Open main wheel doors
doors
www.powerbox-systems.com
extend undercarriage
close wheel doors
extend nosewheel
extend main undercarriage
Close nosewheel doors
retract main undercarriage
close main wheel
close main wheel
15