PowerBox Systems cockpit Instruction Manual page 14

5. SETTING UP THE DOOR SEQUENCER
Select the SEQUENCER point at the main menu; this takes you to the follo-
wing screen display:
The SETUP ASSISTANT is a function in the Cockpit which has been included
since software version V15; it makes the task of programming the actual
door sequencer function considerably easier.
The EXPERT MENU provides a very powerful programming interface, with
which you can program highly individual sequences, or alternatively expand
the settings previously entered using the SETUP ASSISTANT.
The SETUP ASSISTANT describes the TASKs in the actual door sequencer
in accordance with the data you enter. The Assistant guides you through
the settings: everything you need to do is described on the screen. These
printed instructions simply provide additional information which cannot be
displayed on the PowerBox screen due to size limitations.
The recommended programming procedure is as follows: first enter the ba-
sic settings using the SETUP ASSISTANT. At this point the system setup will
be complete for 95% of all models. If you wish to add more wheel doors or
adjust the sequence to cater for other details, this can be carried out in the
EXPERT MENUE.
Select the SETUP ASSISTANT in the menu; this takes you to the following
screen display:
Operate the appropriate transmitter switch, and the PowerBox automati-
cally detects it as the switch which you have assigned to the retract system.
14 PowerBox-Systems − World Leaders in RC Power Supply Systems