Table of Contents
Advertisement
1
In the Fast Configuration Wizard - IP dialog box, define the following
parameters:
Field
IP Service
Name
Signaling Host
IP Address
Media Card 1
IP Address
Media Card 2
IP Address
Subnet Mask
If Secured Communication is required on the RMX: complete the
Fast Configuration Wizard, Login, install the Certificate and then
enable the Secured Communication Mode.
2
Click Next.
3
In the Fast Configuration Wizard - Routes dialog box, enter the IP
address of the default router.
4
Click Next.
5
Enter the required DNS information in the dialog box.
Field
MCU Host Name
6
Description
Use the default name (Default IP Service) or enter a name
using up to 20 characters.
Note: This field is displayed in all dialog boxes.
Enter the IP address of the Central Signaling host. This is
the address used by endpoints for dialing in to the MCU.
Enter the IP address(es) of the media card (s) (MPM/
MPM+/MPMx 1 and MPM/MPM+/MPMx 2 (if installed)) as
provided by the network administrator. Endpoints connect
to conferences and transmit call media (video, voice and
content) via these addresses.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Description
Enter the name of the MCU on the network.
Default name is RMX
Advertisement
Table of Contents
