Installing The Replacement Mpm+/Mpmx Card - Polycom DOC2559A Hardware Manual

Polycom RMX 4000 Hardware Guide
5
Carefully slide the MPM+/MPMx card out through the front panel.

Installing the Replacement MPM+/MPMx Card

1
On the card to be installed, move the ejector levers to their fully open
position.
2
Slide in the replacement MPM+/MPMx card.
3
Push the MPM+/MPMx card firmly into the Backplane, making sure
it is properly seated in its slot.
4
Ensure that the metal ejector levers are fully retracted into their
housings.
5
Tighten the captive screws on the front panel of the RMX that secure
the MPM+/MPMx card to the chassis.
2-13