Advertisement
IMPORTANT!
The water filter head must be firmly pushed into the refrigerator and secured, incorrect installation can lead to water leaks.
●
●
It is not necessary to shut off the water supply when installing the water filter.
●
●
Remove the red protective cap on the spigot head and align the filter cartridge tool over the
1
filter handle.
Pull the freezer drawer out slightly and insert the filter cartridge and tool into the bottom
2
left of the refrigerator. Firmly push the cartridge in until the filter head cannot be pushed
any further.
Filter cartridge in the locked position.
Turn 90° clockwise to tighten. Remove filter cartridge tool and close freezer drawer.
3
22
!2
INSTALL WATER FILTER CARTRIDGE AND KICKSTRIPS
Front view
US 80 PLUMBING INSTALLATION
A
Installing kickstrip filter
4
Remove filter from inside the refrigerator. Fit the filter onto the rails and push to the rear
until it clips securely (refer to A).
SCALE 1.000
SCALE 1.000
SCALE 1.000
B
Top kickstrip grille
5
Ensure the top grille is inserted in the correct orientation (refer to B). Align the top grille
clips to the top plinth slots then firmly push grille onto refrigerator until the clips engage
(refer to C).
C
Advertisement
