Advertisement
b c
b c
115° DOOR OPENING
(FULL ROTATION)
115° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
[FULL ROTATION]
DOOR OPENING AND CLEARANCE DIMENSIONS
Depth of door (widest opening) measured from front of door
A
Depth of drawer (open) measured from front of drawer, including handle
B
Depth of drawer (open) measured from front of drawer, excluding handle
C
Minimum door clearance to adjacent wall*
D
Minimum door clearance to adjacent wall*
E
*
Measured from front cabinetry edge.
8
4
PRODUCT AND CAVITY DIMENSIONS – WITH RD9121W DOOR PANEL SET
d
d
b c
A
A
Wall
(115° – full internal access)
(90° – reduced internal access)
b c
90° DOOR OPENING
90° DOOR OPENING
90° DOOR OPENING
e
e
For 90° door swing a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top
hinge (refer to Z).
WARNING!
Before opening the doors, ensure that the refrigerator is
●
●
a
a
on its base packer and the polystyrene stability blocks
are still in place.
Drawer must be closed when fitting the hinge limiting pin.
●
●
Follow these instructions to avoid risks that can cause
●
●
serious injury or death.
Open door to 90°.
1
Align the hinge limiting pin vertically with the bore hole.
2
Use a hammer to drive the pin through the bore hole.
3
Wall
Z
RS9120WRU
RS9120W(R/L)J
mm
940
400
360
410
110
Advertisement
