2.2
Installation Procedures
2.2.1
Connecting Power Cord
The panel PC can only be powered through a DC electrical outlet (12 ~ 30 V). Be
sure to hold the plug end only. Follow these procedures to connect the power cord:
1.
Connect the female end of the power cord to the DC inlet of the panel PC.
2.
Connect the 3-pin male plug of the power cord to an electrical outlet.
2.2.2
Connecting Keyboard and Mouse
Connect the mouse and keyboard to the I/O connector of the panel PC.
2.2.3
Switching on Power
The power switch is located on the lower right corner on the rear cover of the panel
PC.
Figure 2.4 Connecting Power Cord
11
PPC-6120 User Manual